19/09/22 meeting
To do list (based on discussions in meeting)
Item | Theory or exp input | Notes |
|---|---|---|
Section 2 | ||
Detector response | Exp | Include threshold, efficiency, QF, resolution (and recommendation for how they should be modelled) |
Energy range/region/binning | Exp | Discuss possibility of unbinned analysis? |
Mass and geometry description | Exp | All detectors (crys, LS, muons) |
Section 3 | ||
Toy energy spectrums | Exp (Maddy) | Test with low and high mass spin dependent and independent, as well as a vel dep model |
Interesting/physical velocity dep model | Theory (Ciaran) | Which EFT operator will demonstrate largest dependence/change on vel dist |
Section 4 | ||
Methodology and assumptions for produced limit plot | Theory (Dipan) | e.g., energy ROI, background model for SABRE etc |
Inclusion of DAMA in limit plot | Theory (Dipan) | If possible |
Investiage crystal effects noted by DAMA and CUORE | Theory (Dipan?) | Try to understand if there are paradigms that would relax the Xe limits |
Simulations of MIDM-like events | Exp | Want to redo existing plots w/ the updates to geant4 |
PMT characterisation | Exp | Currently planned, and should be done in November-ish |
LS characterisation | Exp | Need to know realistic energy thresholds (this can be fed a bit by sims) |
Section 5 | ||
Simulations of the decay process in SABRE | Exp | Ideally need more info about the exact signal, e.g., energy and direction of produced e-e+ pairs |
Include summary/description of process in overleaf doc | Theory (Xuangong) | How the signal is generated, what it looks like, how we would assess sensitivity |
Section 6 | ||
Input CSL limits in overleaf doc | Exp (Francesco) |
|
Description of PEP processes | Theory (Cedric) |
|
Meeting details
Zoom: https://unimelb.zoom.us/j/952735561?pwd=S2JQTmpqaUVLZEwzUnZiR2RiWWhBUT09
p/w: 271311
Section 2: Experimental overview
Authors:
Done to date:
Assessment of relevance: Useful to provide a citable, single source of truth for theorists who might want to conduct studies with SABRE or SABRE-like setups.
To do/open questions: Most existing experimental overview/description (background paper, TDR) are more engineering focused (dimension, material etc.). Should this focus more on things relevant for physics test, e.g., backgrounds, thresholds, resolutions for all the detector components?
Section 3: Dark matter halo
Authors: Ciaran and Maddy
Done to date: Theoretical overview of annual modulation and various halo models, brief description of how target choice impacts sensitivity to modulation fraction.
Assessment of relevance: Can make basic arguments for model independent mass restrictions based on a positive or negative modulation. This can then also be used to make predictions as to what other complementary experiments should see in modulation searches.
To do/open questions:
Given time constraints, are there certain distributions or DM models that are better motivated than others? In theory, the biggests changes we would get are for velocity dependent form factors, but are these physical? Otherwise may just consider spin independent, dependent, and then either EFT operator 5 or 7 to show the basic effects.
Section 4: Low energy DM
Authors: Matt (Dolan), Irene, Lindsey
Low velocity Dark Matter - single interaction (Dipan and Irene):
Done to date:
The plot below shows a raw estimate of Sabre sensitivity to axions taking into account SABRE South final mass (50 kg) and 3 years of data taking.
“Cosine-full” line has been calculated by rescaling the Cosine one reported in the paper for all the months of data taking.
Assessment of relevance:
SABRE is not more competitive than Cosine since the full mass and the years of data taking play an important role in the model. SABRE background is lower than Cosine but it is not able to compensate the higher data taking period and the overall mass.
To do/open questions:
Xenon 1T and Xenon nT have not published their results below 1 keV; thus it is not possible to make a guess because the detector and background levels below 1 keV.
SABRE North can be taken into account to increase the mass in the model but they probably don't have an updated background model and this will lead to delays paper.
Verify the final mass of Cosine (106 kg vs approx. 60 kg).
Multiply Interacting Dark Matter
Done to date: Assessment of potential sensitivity is outlined here: https://darkmatteraustralia.atlassian.net/wiki/spaces/CDMPublic/pages/1286570015 .
Assessment of relevance: Owing to our large veto we may set competitive limits for a MIDM search, depending on the liquid scintillator light yield (veto threshold) and the veto PMT dark count rate.
To do/open questions:
Measurements of the dark count rate in the veto PMTs are due by November 2022 – these will permit better estimates of the background rates for a MIDM search.
MIDM requires a challenging trigger condition, which the SABRE trigger may or may not be able to continuously accommodate. The trigger condition is noted in our plans here: https://darkmatteraustralia.atlassian.net/wiki/spaces/SABRE/pages/1489829889
Simulations of MIDM ‘tracks’ in the veto. If the optical photon propagation time << MIDM crossing time then we can probably get away with using a Geant4-produced map of the photon detection efficiency in the veto. These simulations may help refine what a signal event looks like (beyond N-fold coincidence of veto PMTs within veto crossing time), and could be used to define more detailed limit calculations.
Section 5: Boosted DM
Authors: Xuangong and Matt (Gerathy)
Done to date:
Assessment of relevance:
To do/open questions:
Section 6: QM tests
Authors: Ray and Francesco
Done to date: Overview of continuous spontaneous localisation models and how it can be tested.
Assessment of relevance:
To do/open questions: Existing experimental bounds and projected SABRE sensitivity.